- Behringer MX882 User Manual
- Behringer ultra link pro mx882 manual muscle
- Owner's Manual for Audio Behringer Ultralink Pro MX882, download free
- Read online Owner's Manual for Behringer Ultralink Pro MX882 (Page 1)
- Download Owner's Manual for Behringer Ultralink Pro MX882
- Behringer ultralink pro mx-882 - Unboxing review and testing
No user serviceable parts inside; refer servicing to qualified personnel.
Behringer MX882 User Manual
This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Read the manual. All the safety and operation instructions should be read before the appliance is operated. All warnings on the appliance and in the operating instructions should be adhered to.
The appliance should not be used near water e. The appliance should be situated so that its location or position does not interfere with its proper ventilation.
For example, the appliance should not be situated on a bed, sofa rug, or similar surface that may block the ventilation openings, or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliance including amplifiers that produce heat.
The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.
Precautions should be taken so that the grounding or polarization means of an appliance is not defeated. Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, convenience receptacles and the point where they exit from the appliance.
Behringer ultra link pro mx882 manual muscle
The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.
The user should not attempt to service the appliance beyond that is described in the Operating Instructions. All other servicing should be referred to qualified service personnel. It is one of my most pleasant tasks to write this letter to you, because it is the culmination of many months of hard work delivered by our engineering team to reach a very ambitious goal: making an outstanding device better still.
The task to improve one of our best-selling products certainly meant a great deal of responsibility, which we assumed by focusing on you, the discerning user and musician.
Owner's Manual for Audio Behringer Ultralink Pro MX882, download free
It also meant a lot of work and night shifts to accomplish this goal. But it was fun, too. In return, we guarantee you uncompromising quality manufactured under ISO certified management system as well as excellent technical and audio properties at an extremely favorable price. All of this will enable you to fully unfold your creativity without being hampered by budget constraints. We are often asked how we can make it to produce such high-grade devices at such unbelievably low prices.
Many satisfied customers means large sales volumes enabling us to get better conditions of purchase for components, etc. Because we know that your success is our success, too! Everybody has made very personal contributions, starting from the designers of the unit via the many staff members in our company to you, the user of BEHRINGER products.
Ultra-flexible, multi-purpose 8-channel Signal Router for stage and studio applications.
High quality components and design Inputs and outputs Rack mounting Mains voltage Audio connections The front panel control elements The rear panel elements Application as a mixer Application as a splitter Application as a matching amplifier Much like an all-in-one tool, it provides virtually unlimited configurations. Be it the distribution of a stereo signal to several outputs splitter ; the combination of separate signals to one stereo output mixer , or the specific level adaption of individual signals buffer amplifier : the ULTRALINK PRO can perform all of these functions easily - and simultaneously.
For example, it now has input and output level meters and balanced inand outputs.
Basically, the unit consists of six mono channels, which can be used either as a splitter or as a mixer. For instance, a stereo program source can be inserted via the main input to be subsequently routed to any of the mono channels that are set to SPLIT mode. Thus, the stereo input signal coming from the main input section can be distributed selectively among the six mono output channels.
It is of particular advantage that, in MIX mode, the stereo input signal from the main input section is alternatively routed to the main outputs. By using this feature a total of up to 8 single signals can be combined.
Read online Owner's Manual for Behringer Ultralink Pro MX882 (Page 1)
In MIX mode, the mono input signals are simultaneously applied to the respective mono outputs, which permits each channel to be used as an individual matching amplifier. The following applications can be realized:. After reading the manual carefully, make sure it is always on hand for future reference. They boast extreme linearity and very low distortion characteristics.
To complement this design the choice of components includes high tolerance resistors and capacitors, detent potentiometers and several other stringently selected elements. These sub-miniature components known from aerospace technology allow for an extreme packing density and improved reliability.
Additionally, the unit is manufactured in compliance with a ISO certified management system. The new circuit design features automatic hum and noise reduction for balanced signals and thus allows for trouble-free operation, even at high operating levels. Externally induced mains hum etc. The automatic servo-function recognizes the presence of unbalanced connectors and adjusts the nominal level internally to avoid level differences between the input and output signals correction 6 dB.
Nevertheless, we recommend that you carefully examine the packaging and its contents for any signs of physical damage, which may have occurred in transit. Shipping claims must be made by the consignee. Please allow at least an additional 4" depth for the connectors on the back panel. The fuse holder on the female mains connector has 3 triangular markers, with two of these triangles opposing each other. If possible, connect the unit to other devices in a balanced configuration to allow for maximum interference immunity.
Strain relief clamp. For connection of balanced and unbalanced plugs, ring and sleeve have to be bridged at the stereo plug. During installation and operation the user must have sufficient electrical contact to earth.
Each channel is equipped with two rotary controls, one button and eight LEDs. Moreover there is a main section with two rotary controls, one button and eight LEDs. This way it is possible to route a maximum of eight input channels to the main mix. The levels present at the six mono outputs are not affected. Summing the signal levels of several mono channels can overload the main output stage. Blown fuses may only be replaced by fuses of the same type and rating.
Download Owner's Manual for Behringer Ultralink Pro MX882
Use the enclosed power cord to connect the unit to the mains. These are the main outputs, available as balanced XLR connectors. They may be fed either by the left and right main inputs or by any of the six mono inputs or a combination of both. These are the mono inputs.
Connection takes place via balanced XLR connectors. These are the mono outputs, available as balanced XLR connectors.
Behringer ultralink pro mx-882 - Unboxing review and testing
Connection takes place via balanced phone jacks. These are the mono outputs, available as balanced phone jacks. Or use our online registration option available on the World Wide Web at www. In this mode, the LEVEL control determines the amount of each channel at the output bus, while the PAN control is responsible for the allocation of the input signal to the left and right main outputs.
Additionally, the input signal is routed to the respective mono outputs, i. Each channel has a LEVEL knob to control the amount of its signal relative to others in the main section.
Via the corresponding PAN control, each mono input signal can be routed either to the left or right main output.
Of course, any intermediate pan settings can be achieved as well. Since the two main inputs are alternatively routeable to the main outputs, two additional input signals can be added using the main inputs. However, as these inputs do not feature a PAN control, the left main input will always be routed to the left main output; similarly, the right main input can only be sent to the right main output.
A total of 8 mono channels can thus be routed to two main outputs. A splitter is a distribution amplifier which allows for splitting a specific input signal to several outputs. This function is of use, e. Another field of application is in tape duplication systems, where one master tape machine is to be interfaced with several tape duplication recorders. At the same time, the main input signal is also sent to the left or right main output, so that here two additional splitter outputs are available.
Please note that these outputs do not feature a balance routing function. The left main input is routed exclusively to the left main output; similarly, the right main input feeds the right main output only. For this special application, the splitter function configures the unit as a 4-channel stereo splitter. Here, the stereo signal source is connected to the two main inputs.
This kind of application is particularly useful for tape duplication systems. The task of a matching amplifier is to convert the level of a signal source into another level. Of course, this process can also be reversed level attenuation. The corresponding mono output provides the resulting output signal which can be raised or lowered in level.